Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FLEX NORYL™ Resin WCV072 - Americas - (PPE+TPE) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for FLEX NORYL™ Resin WCV072 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Flex Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
FLEX NORYL™ WCV072 resin is a flexible, non-reinforced extrusion grade of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE) with a Shore D Hardness rating of 72. FLEX NORYL WCV072 resin was developed for evaluation in automotive wire + cable applications requiring ISO6722 Class A or B. It exhibits ultra-thin wall capability, good scratch abrasion and pinch resistance, high dimensional stability, low shrinkage and warpage, very low water absorption, chemical resistance, and good dielectric strength. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 13 cm³/10min ISO 1133
Temperatura 280 °C -
Carga 5 kg -
ASTM Dados
Índice de fluidez, MFI 13.8 g/10min ASTM D 1238
Temperatura 280 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1750 MPa ISO 527
Tensão no escoamento 44 MPa ISO 527
Deformação no escoamento 11 % ISO 527
Tensão na ruptura 42 MPa ISO 527
Deformação na ruptura 46 % ISO 527
Módulo de flexão 1740 MPa ISO 178
Res. impacto Charpy c/entalhe, +23°C 33 kJ/m² ISO 179/1eA
Res. impacto Izod c/entalhe, +23°C, 4mm 36 kJ/m² ISO 180/1A
Res. impacto Izod c/entalhe, -30°C, 4mm 6 kJ/m² ISO 180/1A
ASTM Dados
Módulo de tração 1710 MPa ASTM D 638
Resistência à tração no escoamento 43 MPa ASTM D 638
Resistência à tração na ruptura 41 MPa ASTM D 638
Alongamento no escoamento 15 % ASTM D 638
Deformação na ruptura 83 % ASTM D 638
Módulo de flexão 1550 MPa ASTM D 790
Impacto Izod com entalhe, 1/8 in 309 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 67 J/m ASTM D 256
Temperatura -30 °C -
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 98 °C ISO 75-1/-2
Temperatura de amolecimento Vicat, B 114 °C ISO 306
Temperatura de amolecimento Vicat, 120°C/h 50N 117 °C ISO 306
ASTM Dados
DTUL @ 264 psi 92 °C ASTM D 648
Temperatura de amolecimento Vicat 114 °C ASTM D 1525
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 0.12 % Sim. to ISO 62
Absorção de umidade 0.05 % Sim. to ISO 62
Densidade 1030 kg/m³ ISO 1183
Densidade 1030 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Velocidade de parafuso 15 - 40 rpm -
Características
Resistência Química
Resistência química geral
Disponibilidade regional
América do Norte
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.